SF series is a fixed type surface mounted downlight with larger light-emitting area and smaller beam angle, the photoelectric parameters are same as DB series's.
Advantages
Patent private mold design, choose strong housing with good heat dissipation;
Choose branded LEDs like CREE, CITIZEN, EPISTAR against LM80 standard;
Choose ceramic PCB against pure gold thread, high stability and low light decay risk in future;
Choose branded driver like PHILIPS, TRIDONIC, LIFUD, BOKE, etc;
Self-design ATCOB COB LED with Epistar chip, ceramic PCB against pure gold thread, which has features of high light efficiency, high CRI, high stability, low light decay, low SDCM, etc.
The most representative feature of ATCOB COB LED: 150lm/W under CRI>90, R9>50 & 3000K, and the highest CRI can be CRI>97. Also, even if half of the chips don't work, just less than 20% reduction in luminous efficiency.
Special requirement design
Support lighting for food like meat, vegetables and bread, making the food more charming.
The specialized LED+Reflector of lamps for food display can highlight the freshness of food with the most appropriate lighting color, so that the food color under our lighting is closer to or even better than the real color itself. For example, baked food looks more crispy with the golden brown light, and meat looks more bright red with the pink light.
Support Triac, 1-10V, Dali, DMX, 2.4G dimming, Perfectly compatible with almost all famous light sources &drivers: Philips, CREE, CITIZEN, Tridonic, Osram, Lifud, Eaglerise, Meanwell, etc.
Power 7-12W can be CCT adjustable from 2000K to 2800K by Triac dimmable.
Power 20-50W can be CCT adjustable from 2700K to 5700K
Installation process
1. Thread cables through the top plate and fix the top plate on ceiling.
2. Connect the cables.
3. Align & push up the sleeve/lamp body to top plate correctly, and then rotate the sleeve clockwise to lock it with top plate.
4. Pull down and rotate the lamp anticlockwise to check if it is fixed well.
Push up and rotate the lamp anticlockwise if wanna take down the lamp (Must push up first before rotation).